氙燈老化試驗機針對不同材料的老化的實驗標準
日期：2015-02-04 有885人瀏覽
氙燈老化試驗機是諸多生產不可或缺的實驗測試儀器，由于材料在自然環境中會產生自然的老化現象，這些老化現象是不可避免但是可以預測，氙燈老化試驗機的作用就是預測材料的老化的速度和時間，從而做出合理的優化設計，減少老化的危害。
針對不同的行業氙燈老化試驗機的測試實驗標準是不經相同的，例如：紡織行業和企業行業以及涂料行都是不一樣的，這里標準集團（香港）有限公司工程師為你簡單總結一下關于不同的行業的測試標準。
一、紡織品標準
AATCC 16 -2004（室內紡織品）
AATCC 169-2003（室外紡織品）
ISO 105-B02 Texiles-Tests for colour fastness- Part B02: Colour fastness to artifical light：Xeon arc fading lamp test
GB/T 8427 紡織品 色牢度試驗 耐人造光色牢度：氙弧
SGS in house method
二、橡膠標準
ASTM D1148 Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
SGS in house method
三、涂料標準
ISO 11341 Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation 色漆和清漆
ASTM D3451 Testing Coating Powders and Powder Coatings 粉末涂料
ASTM D3794 Testing Coil Coatings 卷材涂料
ASTM D6577 Standard Guide for Testing Industrial Protective Coatings 工業防腐涂料
ASTM D6695 Xenon-Arc Exposures of Paints and Related Coatings 油漆及相關涂層
ASTM D7356 Accelerated acid etch weathering of automotive clearcoats using a xenon-arc exposure device 汽車清漆
GB 1865 Paints and varnishes - Artificial weathering and exposure to artificial radiation- Filtered xenon arc radiation 色漆和清漆
SGS in house method
四、塑料標準
ISO 4892-2 Plastics-Methods of exposure to laboratory light sources-Part 2: Xenon-arc sources
GB 16422.2 塑料實驗室光源暴露試驗方法 第2部分:氙弧燈
ASTM D1248 Polyethylene Plastic Extrusion Materials for Wire and Cable PE擠出線材和管材
ASTM D4101 Polypropylene Plastic Injection and Extrusion Materials PP注塑和擠出材料
ASTM D2565 Xenon-Arc – Plastics for Outdoor Applications 戶外用塑料
ASTM D4459 Xenon-Arc – Plastics for Indoor Applications 室內用塑料
ASTM D5071 Xenon-Arc Exposure of Photodegradable Plastics 光降解塑料
ASTM D6662 Plastic Lumber Decking Boards聚烯烴基木塑甲板
UL 1581 Reference Standard for Electrical Wires, Cables & Flexible Cords電線、電纜、軟線
SGS in house method
五、汽車標準
SAE J1885 & SAE J2412(汽車內飾件)
SAE J1960 & SAE J2527(汽車外飾件)
PV 1303(汽車外飾件)
SGS in house method
六、屋面材料
ASTM D4434 Poly Vinyl Chloride Sheet Roofing
ASTM D4637 EPDM Sheet Used in Single-Ply Roof Membrane
ASTM D4798 Xenon-Arc – Bituminous Materials
ASTM D4811 Nonvulcanized Rubber Sheet Used as Roof Flashing
ASTM D5019 Reinforced Non-Vulcanized Polymeric Sheet
ASTM D6083 Liquid Applied Acrylic Coatings Used in Roofing
SGS in house method
本文位置：試驗解決方案同類閱讀
48小時熱度排行
- 創傷骨科應用 2023-12-14
- 安全鞋外底剛性試驗機 2023-04-23
- DIN55662涂層和清漆耐高壓水沖擊試驗 2023-04-01
- Ford FLTMBO160-04涂料油漆耐高壓水噴 2023-04-01
- Ford VCS 1029,54719高壓蒸汽噴射試驗 2023-04-01
- PV3987高光耐磨測試方法 2023-03-17
- 馬丁代爾織物耐磨性測試：ISO 12947最 2023-02-27
- 手機可靠性測試包括哪些檢測項目和標 2023-02-27
參與評論
